Industry Directory | Manufacturer
Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.
Industry Directory | Association / Non-Profit
An independent body of ESD experts with the mission to review the ESD robustness requirements of modern IC products for allowing safe handling and mounting
New Equipment | Design Services
Expert Printed Circuit Design services. PCB design and engineering services including designing characterization PCB boards for new silicon, developing test plans and providing characterization services. We provide custom hardware development, pcb b
Cleanliness and contamination refers to the analysis of residues and particulate that are present in electronics assemblies and components that could be harmful to the function and reliability of the system. Using our ROSE (Bulk Ionograph) we can ch
Electronics Forum | Thu Oct 05 12:52:34 EDT 2006 | Mario Scalzo, SMT CPE
Good afternoon! Typically, we normally recommend testing the pot, and adding either Sn/Ag or just Sn to keep it at bay. One nice thing about the solubility of Cu in Sn based alloys is that it should reach a theoretical upper limit of about 0.1%. I
Electronics Forum | Thu Jul 27 15:59:36 EDT 2006 | russ
test at the bare board level consists of opens and shorts. It makes sure that all traces are hooked (connected) up to the appropriate place and they are not shorted to a non common conductor. Russ
Used SMT Equipment | Pick and Place/Feeders
2004 Mydata MY12 SMT Pick & Place *** WATCH VIDEO LINK(S) *** Note: Upgraded by the OEM in 2010 Software Level: 2.7.3B Agilis Feeder Compatible Electrical Two-Pole Test Electrical Transistor Test Optical Centering; Bar Code Reader HYDRA; Hyd
Used SMT Equipment | Soldering - Wave
400V 50/60 HZ Version ERSAsoft for: 4.050.000.000 2. Operating System Dell / Windows 7 Processor: Pentium(R) Dual Core E5800 @ 3.20GHz 3.19GHz Memory RAM: 4.00 GB (3.46 GB usable) 320bit Operating System Touch Screen – No Pen Touch, input is availabl
Industry News | 2019-12-09 14:44:26.0
The SMT Reflow Soldering Equipment (Global) award was awarded to Heller Industries by Frost & Sullivan.
Industry News | 2017-07-10 17:31:47.0
GPD Global is in the process of setting up a demonstration center on the East coast of the United States. Rapid Coatings, located in Woburn Massachusetts, will be the East coast demo coating center. A GPD Global conformal coating system (SimpleCoat) configured with spray, precision dispense, and volumetric progressive cavity displacement technology will be used for Rapid Coatings production and customer demonstration.
Parts & Supplies | Assembly Accessories
SMT MACHINE GENUINE Juki Spare Parts JUKI FX-1 FX-1R YA PULLEY UNIT R 40025298 Specifications: Brand Name JUKI YA PULLEY Part number 40025298 Model Ensure Test in machine confirmation Guarantee 1 month usage for machine JUKI FX-1 FX-1R
Parts & Supplies | Chipshooters / Chip Mounters
YAMAHA SMT Spare Parts Original Ys Belt Kke-M9128-000 Model NO.: KKE-M9128-000 Type: High-speed Chip Mounter Part No: Kke-M9128-000 Quality: 100% Tested Lead Time: 3 Days Trademark: YAMAHA Transport Package: Carton or as Your Requirements Specifica
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
Technical Library | 2019-08-19 09:46:13.0
Boundary scan is a method for testing interconnects on printed circuit boards (PCBs) or sub-blocks inside an integrated circuit. It has rapidly become the technology of choice for building reliable high technology electronic products with a high degree of testability. Due to the low-cost and integrated circuit (IC) level access capabilities of boundary scan, its use has expanded beyond traditional board test applications into product design and service.
Why you should attend International Wafer-Level Packaging Conference, October 23 - 25, 2018 in San Jose, California, USA.
Professor Ron Lasky, Ph.D., Phil Zarrow, and Jim Hall discuss the SMT Processes Certification offered by SMTA. http://www.smta.org/certification/ Video production courtesy of Indium Corporation.
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Events Calendar | Tue Feb 15 00:00:00 EST 2022 - Thu Feb 17 00:00:00 EST 2022 | San Jose, California USA
Wafer-Level Packaging Symposium
Events Calendar | Tue Oct 13 00:00:00 EDT 2020 - Thu Oct 15 00:00:00 EDT 2020 | San Jose, California USA
International Wafer-Level Packaging Conference (IWLPC)
Career Center | Rolling Meadows, Illinois USA | Production
Family-oriented specialized PCB test, rework and repair facility seeks several highly skilled technicians. If you are highly skilled then come work with among the best soldering and PCB test and repair technicians in the US. Relevant Work Experience
Career Center | Dallas, Texas USA | Engineering
Education Required: BSEE or equivelant Skills/Requirements: 4+ years experience in design and implementation of RF test sets and programs for circuit boards and products. Strong understanding of RF design principles as well as functional and system
Career Center | Bangalore, India | Engineering,Management,Production,Quality Control,Technical Support
WORK EXPERIENCE DETAILS: 7+ Years of Experience in manufacturing & hardware testing of Protocol conveter & Commissioning, Products delivery and QA/QC. 2+ Years of Experience in Hardware testing and Package Level testing. 2+ Years of Experience in
Career Center | vestal, New York USA | Quality Control
Over 7 years of experience as lead quality engineer in the filed of SMT. Extensive knowledge on Universal GSM,GC60 and GC120 Machines. worked on IBM Rational and Mercury Winruner testing tools.
1st Place Machinery Inc. | http://www.firstplacemachinery.com/first_place_smt_pcb_reflow_ovens_btu_paragon98.html
Manufacturer Forced Impingement Convection The ultimate level of heating efficiency is achieved through BTU's forced impingement convection technology with side to side gas recircultion
KingFei SMT Tech | https://www.smtspare-parts.com/sale-8522618-second-hand-cyberoptics-laser-sensor-6604098-for-yamaha-yv88l-smt-machine.html
, Industrial camera, Power supplies, and a lot more of other electronic/ electric systems, no matter if they are current or obsolete. We provide our customers the highest level of service and technical knowledge in repairing PC boards and Electronic controls